Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP5MM
Single
flute Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut..
R 193.78
Ex VAT:R 168.50
Available Stock: In Stock
Model: KP607441
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with al....
R 1,458.78
Ex VAT:R 1,268.50
Available Stock: In Stock
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm....
R 957.38
Ex VAT:R 832.50
Available Stock: In Stock
Model: KP6MM
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 211.60
Ex VAT:R 184.00
Available Stock: In Stock
Model: KP7005
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cut....
R 616.40
Ex VAT:R 536.00
Available Stock: In Stock
Model: KP701
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board....
R 328.33
Ex VAT:R 285.50
Available Stock: In Stock
Model: KP803
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 293.83
Ex VAT:R 255.50
Available Stock: In Stock
Model: KP805
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 549.13
Ex VAT:R 477.50
Available Stock: In Stock
Model: KP853
Drawer
Pull / Finger Grip
Carbide
Tipped
The drawer pull bit produces a smooth finger grip primarily used on the bottom
edge of drawer fronts. Also used as a finger pull on cabinet doors where no edge
pattern is needed on the front face. Compatible with CNC and table mounted routers.
I..
R 1,392.08
Ex VAT:R 1,210.50
Available Stock: In Stock
Model: KP859
Multiform
Multiform - Moulding maker router bit
Use any portion of the router bit to create many profile possibilities.
Create your own design!
Below is an example of a profile made by flipping over the board and
adjusting the height of cut and setting the router table fence.....
R 2,254.58
Ex VAT:R 1,960.50
Available Stock: In Stock
Model: KP863120
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 1 1/4" or 30mm diameter spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunc....
R 2,653.05
Ex VAT:R 2,307.00
Available Stock: In Stock
Model: KP901
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ..
R 474.95
Ex VAT:R 413.00