Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP99
Cabinet
door set 2 PC
Cabinet door set - Ogee profile
The set is designed to be used in a router table to create a cabinet door.
Rail & stile profile router bits
Panel raise router bit....
R 3,817.20
Ex VAT:R 3,319.30
Available Stock: In Stock
Model: KPCF-02C
Handrail set 2 PC
Tungsten Carbide - Handrail set
The set is designed to be used to profile the components for a handrail.
Face mould router bit
Thumbnail router bit
This router bit has a 12.7mm shank (shaft)
that will fit most large routers with the correct collet. Plea..
R 3,562.64
Ex VAT:R 3,097.95
Available Stock: In Stock
Model: KPEWB24
Router
bit storage
Router bit storage box
The box is made to store 24 1/2' shank router bits.....
R 740.14
Ex VAT:R 643.60
Available Stock: In Stock
Model: KPS6102
Panelling Bevel router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
gra..
R 1,309.68
Ex VAT:R 1,138.85
Out Of Stock
Available Stock: Out Of Stock
Model: KPS6104
Euro Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,201.46
Ex VAT:R 1,044.75
Available Stock: In Stock
Model: KP003K
Cabinet
door set 3 PC
Cabinet door set - Ogee profile
The set is designed to be used in a router table to create a cabinet door.
Rail profile router bit
Stile profile router bit
Panel raise router bit....
R 2,185.00
Ex VAT:R 1,900.00
Available Stock: In Stock
Model: KP3505
RABBETING BIT 1 1/2' X 1/16' DEPTH 9/16' 1/4'SHANK X 7 BEARINGS....
R 1,526.11
Ex VAT:R 1,327.05
Available Stock: In Stock
Model: KP845
DISH CARV. BIT 3/4'D X 5/8' L X 1/4' R X 1/2' SHANK INCL. BEARING....
R 632.96
Ex VAT:R 550.40
Available Stock: In Stock
Model: KP COL
Collet
sleeve - 1/2' - 1/4'
Reducing collet sleeve
The reducing collet sleeve is used with a router's exisitng 1/2' collet.
Simply fit the sleeve in the collet to be able to fit 1/4' shank router bits.....
R 109.54
Ex VAT:R 95.25
Available Stock: In Stock
Model: KP GRUB-1
Grub screw (long) 2.4mm
Grub screw
The grub screw is used to hold the bearing to the router bit.
Make sure that the washer is fitted between the grub screw and the bearing.....
R 7.99
Ex VAT:R 6.95
Available Stock: In Stock
Model: KP100 3-8
Bearing
3/8' OD x 3/16' ID
Router bit bearing
The high quality router bit bearing stands up to heavy use and can be used
with other manufacturers bits.
3/8' OD x 3/16' ID
Always fit the dust cover on the bearing when replacing it.....
R 109.02
Ex VAT:R 94.80
Available Stock: In Stock
Model: KP1001
Edge Profile router bit
Cove profile
The cove router bit is an edge profile router bit that produces a concave profile on the edge of a work piece.
A 3/8” bearing guide does the following on the edge while cutting the work piece with the router.
This two-flute router bit is well balanced,..
R 434.93
Ex VAT:R 378.20