Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP319031
Corner Bead | Edge
Beading
Bit
Carbide
Tipped
Use this router bit to produce three slightly different profiles...
An edge bead with or without a fillet
and
a full corner bead by altering the bit extension or rolling the workpiece between passes.
The corner bead ....
R 553.78
Ex VAT:R 481.55
Available Stock: In Stock
Model: KP3202
22° Bevel
Trim bit
Carbide
Tipped
This 22 degree angled bevel carbide-tipped bit reduces vibration, and its three-flute
configuration produces a very smooth cut. Some craftsmen apply this router bit in trimming
melamine edging to reduce the sharp edge that normally exists on melamine....
R 546.08
Ex VAT:R 474.85
Available Stock: In Stock
Model: KP904
Edge
profile router bits
Bevel profile
Carbide
Tipped
This bevel cutter is a 2 flute, carbide tipped router bit with totally enclosed ball
bearing guide. It is ideal for bevelling and decorative edges. This router bit is also
used for producing a 45° edge for mitres, especially where ..
R 541.13
Ex VAT:R 470.55
Available Stock: In Stock
Model: KP53800
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
Th..
R 532.80
Ex VAT:R 463.30
Available Stock: In Stock
Model: EG2-3
TCT CUTTER 25MM FOR EG1....
R 532.51
Ex VAT:R 463.05
Available Stock: In Stock
Model: KP115457
Double
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead t..
R 532.05
Ex VAT:R 462.65
Available Stock: In Stock
Model: KP805
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 526.64
Ex VAT:R 457.95
Available Stock: In Stock
Model: KP3201
BEVEL TRIM BIT 1/2' X 1/2' 15DEG 1/4' SHANK....
R 516.64
Ex VAT:R 449.25
Available Stock: In Stock
Model: KP2809
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a ¼-round shape bounded by fillets, known as a bead, in one pass by this route..
R 515.89
Ex VAT:R 448.60
Available Stock: In Stock
Model: KP2808
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a ¼-round shape bounded by fillets, known as a bead, in one pass by this route..
R 507.84
Ex VAT:R 441.60
Available Stock: In Stock
Model: KP3503
Rabbeting Cutter
For
cutting rebatesRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternateive bearings with a larger outside diameter, the d....
R 507.67
Ex VAT:R 441.45
Available Stock: In Stock
Model: KP203021
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 498.47
Ex VAT:R 433.45