Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP689
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,468.78
Ex VAT:R 1,277.20
Available Stock: In Stock
Model: KP6MM L
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 202.46
Ex VAT:R 176.05
Available Stock: In Stock
Model: KP7004-1
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 20
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. Th..
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP7004-3
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 0
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. The..
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP7004-4
Biscuit
Slot Cutter
Replacement shaft
For
Biscuit slot cutter KP7005
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits..
R 184.23
Ex VAT:R 160.20
In Stock Soon
Available Stock: In Stock Soon
Model: KP7004-5
Biscuit
Slot Cutter
Replacement blade
For
Biscuit slot cutter KP7004 & KP7005
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20..
R 364.72
Ex VAT:R 317.15
In Stock Soon
Available Stock: In Stock Soon
Model: KP702
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 358.80
Ex VAT:R 312.00
Available Stock: In Stock
Model: KP800020
Spacer
bushings
Spindle moulder cutter spacers
Use the spacer bushings to adapt a &O/; 3/4' bore cutter to fit on a &O/;
1/2' bore spindle shaft.....
R 58.42
Ex VAT:R 50.80
Available Stock: In Stock
Model: KP846
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,521.05
Ex VAT:R 1,322.65
Available Stock: In Stock
Model: KP847
LOCK MITRE BIT 1/4' SHANK....
R 1,521.05
Ex VAT:R 1,322.65
Available Stock: In Stock
Model: KP851-1
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP851
Bearing KP551-6 is included.....
R 202.80
Ex VAT:R 176.35
Available Stock: In Stock
Model: KP8MM
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 188.20
Ex VAT:R 163.65