Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP53802
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
This..
R 826.33
Ex VAT:R 718.55
Out Of Stock
Available Stock: Out Of Stock
Model: KP542411-1
REPLACEMENT 3.2MM CUTTER FOR THE V JOINT TONGUE & GROOVE ASSE....
R 441.43
Ex VAT:R 383.85
Available Stock: In Stock
Model: KP551
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit most sma..
R 1,335.15
Ex VAT:R 1,161.00
Available Stock: In Stock
Model: KP551-7
BUSHING 4.4MM X 22 X 8 FOR 4MM CUT....
R 399.63
Ex VAT:R 347.50
Available Stock: In Stock
Model: KP570811
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock
Model: KP580011
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
&O/; 1/4 inch
&O/; 1/8 inch
Metric
&O/; 6.35mm
&O/; 3.18mm....
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP580021
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
&O/; 3/8 inch
&O/; 1/8 inch
Metric
&O/; 9.53mm
&O/; 3.18mm....
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP580061
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
&O/; 1/2 inch
&O/; 1/4 inch
Metric
&O/; 12.7mm
&O/; 6.35mm....
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP580081
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
&O/; 3/4 inch
&O/; 1/4 inch
Metric
&O/; 19.02mm
&O/; 6.35mm....
R 142.31
Ex VAT:R 123.75
Available Stock: In Stock
Model: KP5MM
Single
flute Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut..
R 185.38
Ex VAT:R 161.20
Available Stock: In Stock
Model: KP607441
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,398.86
Ex VAT:R 1,216.40
Available Stock: In Stock
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 918.22
Ex VAT:R 798.45