Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP4104
3
Wing Slot Cutter
Replacement blade
For
3-Wing carbide tipped
Three-wing slot cutters are convenient where intermediate feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP..
R 411.70
Ex VAT:R 358.00
Available Stock: In Stock
Model: KP4301
Biscuit
Slot Cutter
Replacement shaft
Arbor
for Slotting Cutters
We offer a spare / loose arbor for our range of slot cutters. It comes with a ¼" shank and will accept cutters with a 5/16 " arbor hole.
PRO-TECH
router bits are manufactured in Taiwan.....
R 192.86
Ex VAT:R 167.70
Available Stock: In Stock
Model: KP452411
Double reversible rail & stile cutter set
Carbide Tipped
- Ogee
The cutter contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that ..
R 1,653.41
Ex VAT:R 1,437.75
Available Stock: In Stock
Model: KP49230
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 700.87
Ex VAT:R 609.45
Available Stock: In Stock
Model: KP49234
Profile
router bits with plunge cut capability
Panel Mould bit
Use this carbide tipped plunge panel mould bit for routing decorative details on the
face of raised panels or solid wood panelling. Edge profiling is possible using
a fence. These anti-kickback bits have more body mass, and the..
R 1,225.73
Ex VAT:R 1,065.85
In Stock Soon
Available Stock: In Stock Soon
Model: KP49572
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may also be used fo..
R 1,094.46
Ex VAT:R 951.70
Available Stock: In Stock
Model: KP49574
Panel
Mould Round Over bit
Carbide
Tipped
These cutters are primarily designed to produce panel moulds on cabinet doors and drawer fronts in the
furniture industry. Make round-over shaped panels for any project by routing grooves on the face of the panel.
They may..
R 1,468.78
Ex VAT:R 1,277.20
In Stock Soon
Available Stock: In Stock Soon
Model: KP53800
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
Th..
R 532.80
Ex VAT:R 463.30
Available Stock: In Stock
Model: KP546
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,398.86
Ex VAT:R 1,216.40
Available Stock: In Stock
Model: KP5503
Face
Mould router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
..
R 1,463.78
Ex VAT:R 1,272.85
Available Stock: In Stock
Model: KP551-1
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
R 228.62
Ex VAT:R 198.80
Available Stock: In Stock
Model: KP551-2
SLOT CUTTER 4MM FOR KP551 OR KP851....
R 258.35
Ex VAT:R 224.65