Available Stock: In Stock
Model: KP733040
Spindle
cutter - V - paneling Tongue & Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used for joining paneling to form a 'V' groove. Great for ceilings.
KP800020 ..
R 3,371.17
Ex VAT:R 2,931.45
Available Stock: In Stock
Model: KP413611
Spindle
cutter - Reversible Rail & Stile
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used in door manufacturing to profile and join the rails and stiles. For example: Kitc..
R 2,289.82
Ex VAT:R 1,991.15
Available Stock: In Stock
Model: KP19
Spindle
cutter - Glue joint (single F-joint)
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join..
R 1,845.58
Ex VAT:R 1,604.85
Available Stock: In Stock
Model: KP708010
Spindle
cutter - 3 lip classic bead
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut ¼ rounds and coves
KP800020 - 3/4' - 1/2' spacer rings
..
R 1,780.66
Ex VAT:R 1,548.40
Available Stock: In Stock
Model: KP9
Spindle
cutter - ¼ round 5/16' and Cove 1/2'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut ¼ rounds and coves
KP800020 - 3/4' - 1/2' spacer rings
..
R 1,653.41
Ex VAT:R 1,437.75
Available Stock: In Stock
Model: KP2
Spindle
cutter - Cove 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut coves, flutes or beads.
KP800020 - 3/4' - 1/2' spacer rings
Im..
R 1,591.03
Ex VAT:R 1,383.50
Available Stock: In Stock
Model: KP831010
Spindle
cutter - Ogee lip
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without t..
R 1,526.11
Ex VAT:R 1,327.05
Available Stock: In Stock
Model: KP18
Spindle
cutter - Ogee
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut ogee profiles.
KP800020 - 3/4' - 1/2' spacer rings
Important:
Mak..
R 1,398.86
Ex VAT:R 1,216.40
Available Stock: In Stock
Model: KP20
Spindle
cutter - Straight/Slot/Rabbet 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut grooves/slots and rebates.
KP800020 - 3/4' - 1/2' spacer ri..
R 1,398.86
Ex VAT:R 1,216.40
Available Stock: In Stock
Model: KP12
Spindle
cutter - Wedge Tongue
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to make a tongue and groove and matches up with KP13
KP800020 - 3/4' - 1/2' spacer rin..
R 1,336.47
Ex VAT:R 1,162.15
Available Stock: In Stock
Model: KP13
Spindle
cutter - Wedge Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to make a tongue and groove and matches up with KP12
KP800020 - 3/4' - 1/2' spacer rin..
R 1,271.56
Ex VAT:R 1,105.70
Available Stock: In Stock
Model: KP5
Spindle
cutter - Full bead/½ round/Bull nose 3/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut full beads, ½ rounds or a bull nose.
KP800020 - 3/4..
R 1,241.37
Ex VAT:R 1,079.45