Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP311031
Edge
profile router bits
Classical Ogee profile
Carbide
Tipped
The classical ogee profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a convex and concave shape with a bead in the middle of the
two curves.
Picture framer..
R 896.89
Ex VAT:R 779.90
Available Stock: In Stock
Model: KP315411
Edge Profile router bit
French Traditional Table Edge
This profile can also be used to craft large picture frames. Table edge router bits from
Pro-Tech can be used to form deep decorative detail found on dining room, coffee or end tables,
window sills, chair rails and china cabinets. You..
R 800.17
Ex VAT:R 695.80
Available Stock: In Stock
Model: KP316021
Full
Bead
Carbide
Tipped
This router bit shape is also referred to as the leaf corner profile. In one
pass, this bit forms a round-edge groove near the corner of the workpiece. A second
pass on the adjoining face yields a delicate leaf shaped corner bead. More profiles
can be created u..
R 628.59
Ex VAT:R 546.60
Available Stock: In Stock
Model: KP319031
Corner Bead | Edge
Beading
Bit
Carbide
Tipped
Use this router bit to produce three slightly different profiles...
An edge bead with or without a fillet
and
a full corner bead by altering the bit extension or rolling the workpiece between passes.
The corner bead router bit..
R 553.78
Ex VAT:R 481.55
Available Stock: In Stock
Model: KP319041
Corner Bead | Edge
Beading
Bit
Carbide
Tipped
Use this router bit to produce three slightly different profiles...
An edge bead with or without a fillet
and
a full corner bead by altering the bit extension or rolling/flipping the workpiece between passes.
The corner bead r..
R 593.17
Ex VAT:R 515.80
Available Stock: In Stock
Model: KP3202
22° Bevel
Trim bit
Carbide
Tipped
This 22 degree angled bevel carbide-tipped bit reduces vibration, and its three-flute
configuration produces a very smooth cut. Some craftsmen apply this router bit in trimming
melamine edging to reduce the sharp edge that normally exists on melamine edg..
R 546.08
Ex VAT:R 474.85
Available Stock: In Stock
Model: KP329031
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
6,35..
R 601.80
Ex VAT:R 523.30
Available Stock: In Stock
Model: KP3401
Edge
profile router bits
Classic profile
Carbide
Tipped
The
classic router bit edge profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a
concave and convex shape with a fillet in the middle
This router bit has a
..
R 831.74
Ex VAT:R 723.25
Available Stock: In Stock
Model: KP3403
Edge
profile router bits
Classic profile
Carbide
Tipped
The
classic router bit edge profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a
concave and convex shape with a step in the middle
This router bit has a
..
R 901.72
Ex VAT:R 784.10
Available Stock: In Stock
Model: KP3503-4
Bearing
For
changing cutting depthsRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternative bearings with a larger outside diameter, the depth of
cut can..
R 134.15
Ex VAT:R 116.65
Available Stock: In Stock
Model: KP3503-5
Bearing
For
changing cutting depthsRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternative bearings with a larger outside diameter, the depth of
cut can..
R 134.15
Ex VAT:R 116.65
In Stock Soon
Available Stock: In Stock Soon
Model: KP3503-6
Bearing
For
changing cutting depthsRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternative bearings with a larger outside diameter, the depth of
cut can..
R 134.15
Ex VAT:R 116.65