Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP530411
Drawer lock router bit
Carbide
Tipped - Drawer lock
The router bit makes it easy to join drawers. The glue surface is greater
when compared to a standard butt joint, thus increasing the overall strength and
makes it easier with alignment during assembly.
The cutter is designe..
R 1,068.93
Ex VAT:R 929.50
Available Stock: In Stock
Model: KP542411
V - paneling Tongue & Groove router bit
Carbide
Tipped - Tongue & Groove (V-paneling)
The cutter is used for joining paneling to form a 'V' groove. Great for
ceilings.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will..
R 2,162.52
Ex VAT:R 1,880.45
Available Stock: In Stock
Model: KP551-4
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
R 273.47
Ex VAT:R 237.80
Available Stock: In Stock
Model: KP570841
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP4301
..
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock
Model: KP57136
Coutertop
trimming router bit
6
Wing Carbide
Tipped
Create extra-smooth shallow recesses in countertops with this 6-wing router
bit. The radiused cutting tips produce an edge that's easy on the fingers and simple to clean. Used in a
large handheld router.
This router bit has a
..
R 1,271.56
Ex VAT:R 1,105.70
Available Stock: In Stock
Model: KP5MM-2
Two
flute Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut qu..
R 182.51
Ex VAT:R 158.70
Available Stock: In Stock
Model: KP5MM-3
Two
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut qual..
R 451.89
Ex VAT:R 392.95
Available Stock: In Stock
Model: KP609011-2
Spare
arbor
Router bit spare part
The arbor is compatible with the following cutter:
KP609011....
R 173.08
Ex VAT:R 150.50
Available Stock: In Stock
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft..
R 980.09
Ex VAT:R 852.25
Available Stock: In Stock
Model: KP7004
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cutting ..
R 627.38
Ex VAT:R 545.55
Available Stock: In Stock
Model: KP7004-2
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 10
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. Th..
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP703
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 398.99
Ex VAT:R 346.95