Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP551-8
Slot cutter
Router
bit spare part
The slot cutter cuts 6.35mm in width and is compatible with
KP551 and
KP851.....
R 306.42
Ex VAT:R 266.45
Available Stock: In Stock
Model: KP570821
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP43....
R 438.55
Ex VAT:R 381.35
Out Of Stock
Available Stock: Out Of Stock
Model: KP570831
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP43....
R 434.36
Ex VAT:R 377.70
Available Stock: In Stock
Model: KP570851
4
Wing Slot Cutter
Replacement blade
For
4-Wing carbide tipped
Four-wing slot cutters are convenient where higher feed rates are required
in production. With an overall diameter of 50,8 mm, this cutter should be treated
with care. Can be used with our arbors KP7004-4 and KP43....
R 438.55
Ex VAT:R 381.35
Available Stock: In Stock
Model: KP580091
Bearing
Router
bit spare part
Bearing dimensions:
Unit
Outside diameter
Inside diameter
Imperial
&O/; 3/4 inch
&O/; 1/2 inch
Metric
&O/; 19.02mm
&O/; 12.7mm....
R 202.69
Ex VAT:R 176.25
Available Stock: In Stock
Model: KP5901
Multi-bead
Carbide
Tipped
This
router bit is used for creating a single bead (also referred to as a reed) with
fillets and a rounded edge with the same radius to give a classic rounded off finish
in one pass.
Control cut design helps minimize kickback
Smooth edge requires littl..
R 752.50
Ex VAT:R 654.35
Available Stock: In Stock
Model: KP604411-21
Glue joint set
Carbide
Tipped - Wedge glue joint
The cutter set contains both the groove and tongue cutters to create a wedge
glue joint. The wedge profile assists with alignment during assembly and adds a
greater glue surface, resulting in a stronger joint.
The cutter set i....
R 2,671.68
Ex VAT:R 2,323.20
Available Stock: In Stock
Model: KP609011-1
Spare
cutter (slot cutter)
Router bit spare part
The slot cutter is compatible with the following cutters:
KP609011
KP609411
KP851
KP551....
R 221.66
Ex VAT:R 192.75
Available Stock: In Stock
Model: KP686
25 Degree Raised Panel bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
gra..
R 1,526.11
Ex VAT:R 1,327.05
Available Stock: In Stock
Model: KP689
Ogee Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
g..
R 1,468.78
Ex VAT:R 1,277.20
Available Stock: In Stock
Model: KP6MM L
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 202.46
Ex VAT:R 176.05
Available Stock: In Stock
Model: KP7004-1
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 20
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuit....
R 135.53
Ex VAT:R 117.85