Select your Pro-Tech Category below
Available Stock: In Stock
Model: PTRAP001
Right Angle Positioner 90° 2-Piece Square Set
Achieve precise, flawless 90-degree joints with this 2-piece square set. Designed for woodworking and various assembly projects, this tool ensures perfect right-angle alignment for your workpieces.....
R 529.35
Ex VAT:R 460.30
Available Stock: In Stock
Model: KP532511
TONGUE & GROOVE - ANGLE 1 3/8' x 1' 1/4' SHANK....
R 1,664.22
Ex VAT:R 1,447.15
Available Stock: In Stock
Model: KP TGV01
TONGUE & GROOVE THREE FLUTE V JOINT 1/8' x 1/2'....
R 1,792.85
Ex VAT:R 1,559.00
Available Stock: In Stock
Model: PTPC5551-100
PRO-TECH BISCUIT JOINING #0 100/PACK....
R 155.43
Ex VAT:R 135.16
Available Stock: In Stock
Model: PTPC5553-100
PRO-TECH BISCUIT JOINING #20 100/PACK....
R 155.43
Ex VAT:R 135.16
In Stock Soon
Available Stock: In Stock Soon
Model: EG2-3
TCT CUTTER 25MM FOR EG1....
R 532.51
Ex VAT:R 463.05
Available Stock: In Stock
Model: KP GRUB
Grub screw (short) 2.4mm
Grub screw
The grub screw is used to hold the bearing to the router bit.
Make sure that the washer is fitted between the grub screw and the bearing.....
R 7.99
Ex VAT:R 6.95
Available Stock: In Stock
Model: KP10
Spindle
cutter - ¼ round 3/8' and Bead 1/4'
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter can be configured to cut ¼ rounds and beads
KP800020 - 3/4' - 1/2' spacer rings
..
R 1,038.80
Ex VAT:R 903.30
Available Stock: In Stock
Model: KP100 1-2
Bearing
1/2' OD x 3/16' ID
Router bit bearing
The high quality router bit bearing stands up to heavy use and can be used
with other manufacturers bits.
1/2' OD x 3/16' ID
Always fit the dust cover on the bearing when replacing it.....
R 109.02
Ex VAT:R 94.80
Available Stock: In Stock
Model: KP10353
Wall display T-slot cutters
T-slot bit
These T-slot cutters will allow you to cut both the groove as well as the wider slot in one pass. A carbide cutting edge is part of the neck of the router bit. The anti-kickback design allows for better performance and reduced vibration under cutting load..
R 1,165.07
Ex VAT:R 1,013.10
In Stock Soon
Available Stock: In Stock Soon
Model: KP104459
Double
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead t..
R 485.47
Ex VAT:R 422.15
Available Stock: In Stock
Model: KP10MM
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 192.51
Ex VAT:R 167.40