Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP3503-4
Bearing
For
changing cutting depthsRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternative bearings with a larger outside diameter, the dep....
R 134.15
Ex VAT:R 116.65
Available Stock: In Stock
Model: KP3503-5
Bearing
For
changing cutting depthsRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternative bearings with a larger outside diameter, the dep....
R 134.15
Ex VAT:R 116.65
Available Stock: In Stock
Model: KP3503-6
Bearing
For
changing cutting depthsRabbet: (răb′ĭt) also re·bate (rē′bāt′,răb′ĭt)
A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint.
By choosing alternative bearings with a larger outside diameter, the dep....
R 134.15
Ex VAT:R 116.65
Available Stock: In Stock
Model: KP3MM
Single
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges & the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection & vibration, which degrade cut quality
& lead to t..
R 130.41
Ex VAT:R 113.40
Available Stock: In Stock
Model: KP COL
Collet
sleeve - 1/2' - 1/4'
Reducing collet sleeve
The reducing collet sleeve is used with a router's exisitng 1/2' collet.
Simply fit the sleeve in the collet to be able to fit 1/4' shank router bits.....
R 109.54
Ex VAT:R 95.25
Available Stock: In Stock
Model: KP100 3-8
Bearing
3/8' OD x 3/16' ID
Router bit bearing
The high quality router bit bearing st&s up to heavy use & can be used
with other manufacturers bits.
3/8' OD x 3/16' ID
Always fit the dust cover on the bearing when replacing it.....
R 109.02
Ex VAT:R 94.80
Available Stock: In Stock
Model: KP100 1-2
Bearing
1/2' OD x 3/16' ID
Router bit bearing
The high quality router bit bearing st&s up to heavy use & can be used
with other manufacturers bits.
1/2' OD x 3/16' ID
Always fit the dust cover on the bearing when replacing it.....
R 109.02
Ex VAT:R 94.80
Available Stock: In Stock
Model: KP800020
Spacer
bushings
Spindle moulder cutter spacers
Use the spacer bushings to adapt a &O/; 3/4' bore cutter to fit on a &O/;
1/2' bore spindle shaft.....
R 58.42
Ex VAT:R 50.80
Available Stock: In Stock
Model: KP RC
Retaining collar for 1/4' shaft router bits
Retaining collar
The retaining collar is used to secure a bearing with an internal diameter &O/; 1/4' to a 1/4' shaft router bit.
Secure the retaining collar by tightening the supplied grub screw.....
R 30.19
Ex VAT:R 26.25
Available Stock: In Stock
Model: KP RC-2
Retaining collar for 1/2' shaft router bits
Retaining collar
The retaining collar is used to secure a bearing with an internal diameter &O/; 1/2' to a 1/2' shaft router bit.
Secure the retaining collar by tightening the supplied grub screw.....
R 30.19
Ex VAT:R 26.25
Available Stock: In Stock
Model: KP GRUB-1
Grub screw (long) 2.4mm
Grub screw
The grub screw is used to hold the bearing to the router bit.
Make sure that the washer is fitted between the grub screw & the bearing.....
R 7.99
Ex VAT:R 6.95
Available Stock: In Stock
Model: KP GRUB
Grub screw (short) 2.4mm
Grub screw
The grub screw is used to hold the bearing to the router bit.
Make sure that the washer is fitted between the grub screw & the bearing.....
R 7.99
Ex VAT:R 6.95