Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP5MM
Single
flute Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut..
R 185.38
Ex VAT:R 161.20
Available Stock: In Stock
Model: KP601209
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
R 2,035.27
Ex VAT:R 1,769.80
Available Stock: In Stock
Model: KP601210
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
..
R 1,877.43
Ex VAT:R 1,632.55
Available Stock: In Stock
Model: KP607441
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with alignment durin..
R 1,398.86
Ex VAT:R 1,216.40
Available Stock: In Stock
Model: KP609011
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft..
R 918.22
Ex VAT:R 798.45
Available Stock: In Stock
Model: KP6MM
Two
flute Metric Straight bit
Carbide
Tipped
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut ..
R 202.46
Ex VAT:R 176.05
In Stock Soon
Available Stock: In Stock Soon
Model: KP7005
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cutting ..
R 591.04
Ex VAT:R 513.95
Available Stock: In Stock
Model: KP701
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 314.70
Ex VAT:R 273.65
Available Stock: In Stock
Model: KP733040
Spindle
cutter - V - paneling Tongue & Groove
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used for joining paneling to form a 'V' groove. Great for ceilings.
KP800020 ..
R 3,371.17
Ex VAT:R 2,931.45
Available Stock: In Stock
Model: KP803
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 281.58
Ex VAT:R 244.85
Available Stock: In Stock
Model: KP805
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 526.64
Ex VAT:R 457.95
Available Stock: In Stock
Model: KP831010
Spindle
cutter - Ogee lip
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without t..
R 1,526.11
Ex VAT:R 1,327.05