Model: KP212491
Dovetail bit
Carbide
Tipped
Our dovetail routers consist of a solid steel body and carbide tipped cutting edges.
With its 14 degree profile angle, it is applied in
most common half-blind dovetails. Router cutters are available
in shank sizes ¼" and ½".
This route....
R 608.35
Ex VAT:R 529.00
Model: KP213011
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a....
R 661.25
Ex VAT:R 575.00
Model: KP213041
Profile
router bits with plunge cut capability
Pierce & Round Over
Plunge Bit
This
very special router bit is a round over bit with a slightly longer straight cutting
edge at the bottom. Round overs are classified by the radius they cut. A ½ inch
radius bit (12,7 mm) cut a....
R 1,322.50
Ex VAT:R 1,150.00
Model: KP216461
Ball cutting
router bit
Carbide
Tipped
Cut channels for pipes or cables using the ball end bit. The profile requires
the cut to be made in a single pass. To reduce stress on the bit, cut an initial
groove using a straight bit matching the diameter dimension of the ball end bit.
Cut cha..
R 1,079.85
Ex VAT:R 939.00
Model: KP234011B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Bitt
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
These ..
R 573.85
Ex VAT:R 499.00
Model: KP236011B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Pattern Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
..
R 573.85
Ex VAT:R 499.00
Model: KP236021B
Profile
router bits with plunge cut capability and top bearing
Classical Plunge Pattern Bit
Use this carbide tipped classical plunge bit for routing decorative details on the
face of raised panels or solid wood panelling using a template. Edge profiling is possible in a router table setup.
..
R 861.35
Ex VAT:R 749.00
Model: KP25MM L-2
Two
flute Metric Straight bit
Carbide
Tipped
In choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required depth.
Excessive length intensifies deflection and vibration, which degrade cut qual..
R 661.25
Ex VAT:R 575.00
Model: KP2801
Beading bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by this router
..
R 573.85
Ex VAT:R 499.00
Model: KP2808
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by this..
R 688.85
Ex VAT:R 599.00
Model: KP2812
Beading
router bit
Carbide
Tipped
Beading bits are similar to the round over profile, but a smaller bearing produces
a delicate inset at the base of the cut, giving you an extra decorative option.
Cut
a quarter-round shape bounded by fillets, known as a bead, in one pass by ..
R 1,493.85
Ex VAT:R 1,299.00
Model: KP301
Flush
Trim bit
Carbide
Tipped
Our flush trim bits feature outstanding tool longevity. Featuring excellent carbide
brazing, a broad selection of sizes and most importantly quality of cut. The flush
trim router bit cuts a variety of materials from wood, plywood, MDF and other wood
compos..
R 378.35
Ex VAT:R 329.00