Model: KP5MM-3
Two
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut qual..
R 677.35
Ex VAT:R 589.00
Model: KP601201
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
....
R 2,643.85
Ex VAT:R 2,299.00
Model: KP601204
Rosette cutter
Tungsten
Carbide - Rosette cutter
Create decorative designs with a Rosette cutter.
Fit the cutter in a drill press chuck
Set speed to a slow rpm
Clamp down the material at desired location
Plunge the cutter into the material, revealing a Rosette.
....
R 2,643.85
Ex VAT:R 2,299.00
Model: KP609011-2
Spare
arbor
Router bit spare part
The arbor is compatible with the following cutter:
KP609011....
R 263.35
Ex VAT:R 229.00
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm....
R 1,378.85
Ex VAT:R 1,199.00
Model: KP7004
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cut....
R 838.35
Ex VAT:R 729.00
Model: KP7004-2
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 10
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuit....
R 201.25
Ex VAT:R 175.00
Model: KP703
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board....
R 557.75
Ex VAT:R 485.00
Model: KP706
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board....
R 976.35
Ex VAT:R 849.00
Model: KP801
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 309.35
Ex VAT:R 269.00
Model: KP802
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 378.35
Ex VAT:R 329.00
Model: KP804
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 539.35
Ex VAT:R 469.00