Select your Pro-Tech Category below
Available Stock: In Stock
Model: KP609411
Tongue & Groove
Carbide
Tipped - Tongue & Groove
The cutter is fitted with 2 bearing guides to assist with alignment and
initial setup. Material up to 19mm thick can easily be joined.
The cutter is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft..
R 980.09
Ex VAT:R 852.25
Available Stock: In Stock
Model: KP7004
Biscuit
Slot Cutter
The biscuit slot cutter comes in handy when one does not have access to a biscuit joiner.
It is more than a biscuit slot cutter – it can be used for cutting slots in the side of wood
for other purposes too.
This four-wing design allows for cutting ..
R 627.38
Ex VAT:R 545.55
Available Stock: In Stock
Model: KP7004-2
Biscuit
Slot Cutter
Replacement bearing guide
For
Biscuit No. 10
The biscuit slot cutter comes in handy when one does not have access to a
biscuit joiner.
Our Pro-Tech four-wing cutter design allows for cutting precise slots for No. 0, No.
10 and No. 20 biscuits. Th..
R 135.53
Ex VAT:R 117.85
Available Stock: In Stock
Model: KP703
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 398.99
Ex VAT:R 346.95
Available Stock: In Stock
Model: KP706
90°
V-groove router bit
Carbide
Tipped
V-groove router bits have many uses. One particular application is in carving lettering and other decorative signage.
In the drywalling industry this router bit is used to cut a 90 degree v-groove in the drywall sheet almost through the board. Th..
R 700.01
Ex VAT:R 608.70
Available Stock: In Stock
Model: KP801
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 213.15
Ex VAT:R 185.35
Available Stock: In Stock
Model: KP802
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 265.02
Ex VAT:R 230.45
Available Stock: In Stock
Model: KP804
Core
box router bit
Carbide
Tipped
Pro-Tech offer eight sizes core box router bits. These bits can be used in hard
woods, soft woods, plastics and other composite materials. Our range of bits can
be used with hand-held, table-mounted and CNC routers. Application is where a round
bottom..
R 379.79
Ex VAT:R 330.25
Available Stock: In Stock
Model: KP848
Lock Mitre router bit
for strongh box joints
The lock-mitre cutter makes extremely strong mitred corner
joints. Various applications for this joint type include wooden
pillars, boxes and extremely strong drawers. The lock mitre joint is an improvement
over standard mitre joints in box..
R 1,526.11
Ex VAT:R 1,327.05
Available Stock: In Stock
Model: KP851
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (shaft) that will fit most lar..
R 1,258.96
Ex VAT:R 1,094.75
Available Stock: In Stock
Model: KP863060
Spindle
cutter - Raised panel
Tungsten Carbide - 3 wing
The cutter is designed to be used with a stationary spindle moulder equipped with either a 3/4' or 1/2' spindle shaft.
The cutter is used to create a raised panel in the door manufacturing process. Used in conjunction with the ra..
R 2,289.82
Ex VAT:R 1,991.15
Available Stock: In Stock
Model: KP90
Vertical Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the..
R 1,653.41
Ex VAT:R 1,437.75