Available Stock: In Stock
Model: KP53800
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
Th..
R 555.45
Ex VAT:R 483.00
Available Stock: In Stock
Model: KP53802
Finger grip bit
Carbide
Tipped
This finger grip router bit produces clean and modern cabinet, kitchen door and chest
pulls, totally uninterrupted by hardware providing a positive grip that is easy on the
fingers. A must-have in any cabinetmaker’s workshop.
Eliminate hardware!
This..
R 861.93
Ex VAT:R 749.50
Available Stock: In Stock
Model: KP542411
V - paneling Tongue & Groove router bit
Carbide
Tipped - Tongue & Groove (V-paneling)
The cutter is used for joining paneling to form a "V" groove. Great for
ceilings.
The cutter set is designed to be used in a router table.
This router bit has a 12.7mm shank (sha....
R 2,254.58
Ex VAT:R 1,960.50
Available Stock: In Stock
Model: KP542411-1
REPLACEMENT 3.2MM CUTTER FOR THE V JOINT TONGUE & GROOVE ASSE....
R 460.58
Ex VAT:R 400.50
Available Stock: In Stock
Model: KP546
Taper Tongue & Groove router bit (single F-joint)
Carbide
Tipped - Tongue & Groove (single F-joint)
The cutter is a counter-profile cutter. When properly aligned, it will allow two panels to join together without the use of a secondary cuttter. The F-profile assists with al....
R 1,458.78
Ex VAT:R 1,268.50
Available Stock: In Stock
Model: KP5503
Face
Mould router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
..
R 1,526.05
Ex VAT:R 1,327.00
Available Stock: In Stock
Model: KP551
Rail & Stile cutter
Carbide Tipped
- Ogee
The cutter set contains both the rail and stile cutters to create the frame of a cabinet door with an ogee profile.
The cutter set is designed to be used in a router table.
This router bit has a 6.35mm shank (shaft) that will fit mos....
R 1,392.08
Ex VAT:R 1,210.50
Available Stock: In Stock
Model: KP551-1
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
R 238.63
Ex VAT:R 207.50
Available Stock: In Stock
Model: KP551-2
SLOT CUTTER 4MM FOR KP551 OR KP851....
R 269.68
Ex VAT:R 234.50
Available Stock: In Stock
Model: KP551-3
Spare cutter
Router
bit spare part
This ogee cutter cuts 12.7mm instead of the 9.5mm standard and is compatible
with
KP551 and
KP851.....
R 491.63
Ex VAT:R 427.50
Available Stock: In Stock
Model: KP551-4
Spare arbor
Router
bit spare part
The arbor is a spare part for the rail and stile cutter
KP551
Bearing KP551-6 is included.....
R 285.20
Ex VAT:R 248.00
Available Stock: In Stock
Model: KP551-5
Spare cutter
Router
bit spare part
This ogee cutter cuts 9.5mm and is the standard cutter supplied with
KP551 and
KP851.....
R 455.40
Ex VAT:R 396.00